Now available, the Garrett edition TO4Z turbocharger. This ball bearing TO4R includes a P-trim turbine wheel in a T4 turbine housing and a compressor wheel that measures 66mm on the inducer and 84mm for an exducer. Standard T4 turbine housings are available in as follows.
Divided - .84, 1.0, 1.15, and 1.32 A/R
Open Volute - .96 A/R
Optional ported shroud compressor housing and polishing pictured available at an additional cost.
Heat management and TFE coatings are available at an additional cost.
***Click 'Enlarge' to view this turbo's published compressor map.***